Radio Keeps Changing Stations by Itself (6 Reasons & Solutions)

Radio Keeps Changing Stations by Itself

Are you having issues with your car radio constantly changing stations by itself?

It’s an annoying problem, but rest assured that you’re not alone. Many drivers have experienced this issue and found it difficult to troubleshoot.

In this blog post, we’ll dive into the potential causes for why your radio is unexpectedly switching stations on its own as well as explore some of the common solutions that have worked for many people in the past.

So if you’re looking for a clear answer to your radio woes, keep reading!

Radio Keeps Changing Stations by Itself [Reasons]

There are  a few reasons why your car’s radio might be changing stations on its own. It could be a simple issue like loose wiring, or it could be something more serious like a problem with the radio itself.

#1 – The touch Screen Is Damaged

Touch Screen Is Damaged

The touch screen on a radio can become damaged over time from constant use. This can cause the radio to act erratically and switch stations by itself, often when it is touched or moved.

To fix this issue, the user should check for any signs of physical damage to the touch screen, such as cracks, scratches, or discolorations. The touch screen should be replaced if any of these signs are detected. If the touch screen appears in good condition, resetting the radio may help.

If your car’s radio has a touch screen, it’s possible that the screen is damaged and causing the problem. If the screen is cracked or otherwise damaged, it could be sending signals to the radio that cause it to change stations. If you think this might be the problem, take your car to a mechanic or dealership to have the screen repaired or replaced.

#2 – Bug In Software

Another common cause of radio stations changing by themselves is a bug in the radio’s software. This can be caused by outdated firmware or incorrect settings.

To fix this issue, the user should check for any updates to their device’s software and install them if available.

If no updates are available, then resetting the radio may help. The user should refer to their owner’s manual for instructions on how to reset their radio. Sometimes, a software update may also need to be performed before resetting the device. If none of these solutions work, the user should consult a professional for further assistance.

Alternatively, the user may take their device to an authorized technician or repair shop specializing in radio repairs and replacements. With their expertise, they will quickly identify the issue and offer an effective solution.

#3 – The Old Car Stereo May Be The Problem

The Old Car Stereo May Be The Problem

If you have an old car stereo, it’s possible that the issue is with the stereo itself and not the car. Over time, the components in a stereo can degrade and cause problems. If your radio is changing stations on its own, it’s worth taking the stereo to a professional to see if it needs to be repaired or replaced.

Even if your car stereo is new, it’s still possible that the issue is with the stereo and not the car. If you’re having trouble with a new stereo, you can try taking it back to the store where you bought it and getting a replacement.

#4 – Electromagnetic Interference

Electromagnetic interference can also cause the radio to switch stations by itself. This is caused when electromagnetic signals from other electronic devices interfere with the radio’s signal reception.

To fix this issue, the user should try to move any nearby electronic devices away from their radio or turn them off temporarily while they are listening.

If that does not help, the user should try to move the radio away from other electronic devices. In some cases, turning on a different interference filter may also help. If none of these solutions work, the user should consult a professional for further assistance.

#5 – The Buttons Have Become Unclickable

The Buttons Have Become Unclickable / Sticky

The buttons on a radio can become unclickable or sticky over time due to dirt and debris. This can cause the radio to act erratically and switch stations by itself, often when it is touched or moved.

To fix this issue, the user should try cleaning the buttons with a damp cloth or rubbing alcohol to remove any dirt and debris causing them to stick.

If the problem persists, use a canned air duster to blast away any dirt or debris that might be stuck inside the button mechanism.

If you have spilled some liquid on the radio, this may have caused the buttons to become sticky. In this case, you will need to remove the radio from the dash and disassemble it to clean all the components.

If needed, you have to consult a professional for further assistance. Additionally, it is important to keep the radio clean and dust-free to prevent further issues.

#6 – The Steering Wheel Control Button Has A Design Flaw Or Is Getting Sticky

The Steering Wheel Control Button Has A Design Flaw Or Is Getting Sticky

Another potential cause for a radio that changes stations is a design flaw in the steering wheel button. In some cars, the button is placed too close to the edge of the steering wheel. When you turn the wheel, your thumb can accidentally hit the button and change the station.

In other cases, sometimes radios become sticky due to age, which can cause them to switch stations by themselves.

To fix this issue, the user should check for any signs of physical damage, such as cracks or discolorations. If there are none, they should try cleaning the button with a damp cloth or rubbing alcohol to remove any dirt and debris causing it to stick. If the issue persists, they should consider replacing the steering wheel control button with a new one. If needed, the user can consult a professional for further assistance.

Car Radio Not Receiving Any Stations (Reasons & Solutions)

Head Unit Issues

Head Unit Issues can be a common cause of poor car radio reception. Faulty head units may not receive signals from the antenna properly, causing the radio to lose stations or sound distorted.

To fix this issue, check the wiring between your head unit and antenna for any loose connections.

Additionally, compatibility issues could arise if the head unit is incompatible with the antenna, so it is important to ensure they are compatible. If these steps fail, you may need to replace the head unit. Depending on your car model and radio system, this can be a relatively simple fix or requires professional assistance.

Inspecting Connections Between the Antenna and Head Unit

To ensure that your car radio receives a good signal, you should check the connections between the antenna and the head unit.

If there are any loose connections, the radio may not be able to receive the signal properly. Check all of the wirings and make sure it is securely connected. If the wiring is in good condition and tightly connected, then the problem may be elsewhere.

Check the Connection of the Car Antenna to Grounding

The grounding of your car antenna is also essential for proper radio reception. If the ground connection becomes loose or corroded, it can cause static and interference that can degrade the signal quality.

To check this, locate the antenna and inspect it for any signs of damage or corrosion. You should also check the antenna connection to ensure it is firmly connected and grounded. If any of these issues persist, you may need to replace the antenna or have a professional look at it.


Why won’t my car radio save the stations?

There are a few potential reasons why your car radio won’t save the stations:

  • The memory in the radio is full:

If the memory in your radio is full, it won’t be able to save any new stations. To fix this issue, you can try deleting some of the stations that are already saved in the radio’s memory.

  • Wiring issues:

If the wiring in your car is damaged, it could prevent the radio from saving stations. To fix this issue, you can try replacing the damaged wire.

Why does my car radio keep going to AUX?

There are a few reasons this could be happening:

  • The AUX input may be selected as the default audio source. Check your car stereo’s settings to see if this is the case.
  • If your car has an aftermarket stereo, the wiring may be loose or damaged. Check the wiring and connections to make sure they are secure.
  • There could be a problem with the car stereo itself. If the issue persists, you may need to have the stereo repaired or replaced.

What is the procedure for turning off seek radio?

If your radio is seeking stations by itself, there are a few things that could be causing the issue. First, check to make sure that the “Local/DX” switch is in the Local position. This switch is usually located on the back of the radio. If this switch is set to DX, the radio will automatically seek out distant stations.

Another possibility is that the auto-seek feature is turned on. This feature can usually be found in the menu of most radios. To turn it off, simply navigate to the menu and find the auto-seek setting. Once you’ve located it, disable the feature or set it to manual.

If neither of these solutions solves the problem, there may be an issue with the radio itself. In this case, it’s best to consult the owner’s manual or take the radio to a qualified technician for further diagnosis.

Why does my radio keep going to different stations?

There are a few reasons why your radio might be changing stations by itself. The most common reason is that you have a weak or intermittent signal. This can be caused by anything from bad weather to a faulty antenna.

Another possibility is that your radio is picking up interference from another source, like a nearby power line or another electronic device.

If you think this might be the case, try moving your radio away from the interference source. Finally, it’s possible that your radio is simply malfunctioning.

Why are all my radio stations fuzzy?

The fuzziness of your radio stations could be due to a poor antenna connection. Poor connections can cause interference and static in the signal, making your radio stations sound fuzzy. You may want to inspect the antenna connections for any signs of damage or wear. If they look fine, then you may need to replace the antenna.

Additionally, if your car radio is an older model, it may not be able to pick up or tune into certain stations or frequencies. Infection from nearby electrical devices, such as cell phones and power supplies, can cause your radio to sound fuzzy. If that is the case, try moving away from the source of interference and see if that helps.

How can I tell if my radio antenna is not functioning correctly?

If you suspect your radio antenna is malfunctioning, there are several ways to confirm it. The most common signs of a bad antenna are poor reception, static or noise when tuning in a station, and interference from other signals.

If you’re having any of these difficulties, likely, your antenna isn’t working correctly. Additionally, if your antenna is physically broken or damaged, it likely needs to be replaced.

Lastly, if you are using an indoor antenna, it may not be powerful enough to pick up certain signals. If your antenna isn’t picking up any stations in the area, it may need to be replaced, or you may need to get a more powerful indoor antenna. If these troubleshooting steps don’t fix the problem, you may need to bring your radio and antenna to a professional for further testing and repairs.

Why are none of my radio stations coming in?

If you’re having trouble getting any radio stations to come in, the first thing to check is your antenna connections. To ensure flawless transmission, it is essential to firmly attach your antenna and guarantee that it remains undamaged. If the antenna connections seem fine, you might need to adjust your radio’s settings.

Depending on your radio type, you may need to adjust the antenna gain or amplifier setting. Additionally, certain types of radios require you to search for specific frequencies or bands to get radio stations coming in. Make sure that the settings on your radio are correct and that you’ve tuned it to the right frequency.

What does RF interference sound like?

RF interference can cause static or a low humming sound like you would hear on an analog television channel. Depending on the frequency of the RF interference, it can also produce an audible tone or low-frequency hum. It is essential to remember that the noise of RF interference can vary based on the device and its environment.

For example, if your device is near high-power equipment like an industrial machine or an electric transformer, then the sound of the interference can be louder and more noticeable. Additionally, if your device is in a large open space with lots of electromagnetic activity, the sound may be more faint and difficult to detect.

Related Posts

I'm Miles Walker and I'm the founder of I've been in the car audio industry for over 20 years and have a wealth of knowledge to offer on all things related to car audio. I graduated from UC Berkeley with an electrical engineering degree, so you can rely on me for top-notch expertise and advice when it comes to upgrading your sound system.

Why Trust

At, our dedicated team of experts passionately researches, tests, and evaluates car audio equipment. Our reviews are crafted through hands-on testing, in-depth research, and meticulous analysis of customer feedback. We regularly update our reviews to provide you with the latest car audio recommendations reflecting changes in availability and new information. We're committed to providing reliable, unbiased insights to ensure you make informed decisions for the ultimate car audio experience.

Leave a Comment is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to